Stems

- CNC Machined from hard high grade 7075 T73 Aluminum - 0 deg rise to keep you low and in control - 69mm wide clamping platform for an incredibly stiff front end - Intended Use: Downhill

Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.

Introducing the Onyx stem. Using cold forging technology rather than CNC machining, this stem has an incredibly smooth and unique shape but also strength advantages over a traditional CNC machined stem. - Cold-forged deisgn for strength, asthetics and value - Weight saving internal machining - STC (Shark Tooth Clamping) for increased grip - Steerer Clamp Diameter: 1-1/8" ins - Weight (oz): 11.15 - Stem Type: Top Load

Eclat Metra stem features a unique offset rear for improved clamping. - Wider faceplate to improve grip - 6mm large head bolts - Bar Clamp Diameter (mm): 25.4 - Reach: 51 mm - Rise: 30 mm - Steerer Clamp Diameter: 1-1/8" ins - Stack Height: 32 - Weight (oz): 12.87 - Stem Type: Top Load

Constructed of 6061-T6 alloy, the Domain stem is fully CNC machined with offset rear machining for improved clamping and maximum underside machining to remove excess material for additional weight savings. With an overall simpler design, wider faceplate, and larger head 6mm hex bolts, if you're looking for a clean and refined stem that won't let you down, you've found it. - 6mm larger head hex bolts - Unique offset rear for improved clamping - Material saving and unique look - Wider faceplate for improved clamping - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8-inch - Weight (oz): 10.9

The Burns V2 improves upon the original with larger-head bolts and a refined shape. Run it right-side-up or upside-down - like Sean himself. - 6061-T6 alloy, cold forged with full cnc finish - Unique offset rear for improved clamping - Can also be run flipped for lower rise - Bar Clamp Diameter (mm): 22.2 - Reach: 50 mm - Rise: 23 mm - Steerer Clamp Diameter: 1-1/8-inch - Stack Height: 32 - Weight (oz): 11.48 - Stem Type: Top Load

The Dune stem top loader looks incredibly clean thanks to a sunken area for the fork top bolt.This sturdy unit features a taller 31mm rise and an extra wide clamping area to hold your bars extra tight. - 6061-T6 alloy, cold forged with full cnc finish - 6mm micro head bolts - Unique offset rear for improved clamping - CNC machined underside for weight reduction

- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)

- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 25.4mm handlebar clamp - M6 Black hardware - Weight: 161g (110mm)

- 3D forged alloy construction - Fits 1-1/8 (28.6mm) steerer forks - Fits 25.4mm handlebar clamp - M6 Black hardware - Weight: 161g (110mm)

- 3D forged alloy construction - Fits 1-1/8 (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)

- Lightweight aluminum construction - Adjusts from 0° to 60° - 25.4mm handlebar clamp - 475g

- Forged alloy adjustable stem - Adjusts from 0° to 50° - 370g

FSA's Omega line is the perfect workhorse component group for the sport rider who wants race-winning technology and durability along with classic good looks. - 3D-forged and CNC-machined from AL6061/T6 - 4-bolt cold-forged face plate - Chromoly hardware - ±6° - 31.8mm handlebar clamp diameter - 35mm fork clamp stack height - 127 grams (100mm)

- 3D forged 6061 aluminum alloy body with oversize box cross-section - 46mm wide 6061 alloy faceplate - Steel hardware - Not OD2, regular 1-1/8"

- 3D forged 2014 aluminum alloy with oversized box cross-section - Oversize 46mm wide 6061 alloy faceplate - Steel hardware - 1-1/8" steerer adapter included

- 3D forged 2014 aluminum alloy with oversized box cross-section - Oversize 46mm wide 6061 alloy faceplate - Steel hardware - ± 8° rise requires fewer spacers - 1-1/8" steerer adapter included

Made for round 1 1/8 inch steerer tubes, the Contact AeroLight is a lightweight stem that offers easy-to-adjust integrated cable routing for drop or flat bar bikes. FEATURES: - Made for round 1 1/8 inch steerer tubes. - 31.8mm round clamp fits drop and flat handlebars. - Integrated aero design unifies the top cap, cables, and spacers with the head tube for improved aerodynamics. - Premium alloy design delivers maximum stiffness and is lightweight. - Easy cable management guides cables under the handlebar and into the side and underside of the stem for optimized aerodynamics and a clean look. - Available in eight lengths from 80mm to 140mm. SPECIFICATIONS: - Weight: 190g (100mm) - Length: 70/80/90/100/110/120/130/140mm - Angle: -10° - Bar Clamp Diameter: 31.8mm - Steerer Tube Clamp Diameter: Round, 1 1/8 inch - Stack Height: 40mm

- 3D forged, 6061 aluminum alloy body with oversize box cross-section - Oversized 52mm wide 6061 alloy faceplate - 35mm handlebar clamp diameter - Not OD2, regular 1-1/8"

- Giant's advanced alloy manufacturing process for a 35mm clamp diameter with maximized strength at minimal weight. - Not OD2, regular 1-1/8".

- Adjustable stem to fit RideDash EVO display - Ahead style

Engineered exclusively for OverDrive Aero steerer tubes, the Contact SL AeroLight stem is a lightweight and stiff alloy stem featuring easy-to-install cable integration for optimal aerodynamics and a clean look. FEATURES: - Made for OverDrive Aero steerer tubes only. - Integrated aero silhouette unites the stem cap, spacers, and head tube for aerodynamic advantage. - Ultra-light alloy design delivers maximum stiffness at a super lightweight. - Easy cable management guides all cables under and inside for optimized aerodynamics and a clean look. - Fits current generation Contact Aero or Contact D-Fuse handlebars. - Available in eight lengths from 80mm to 140mm. SPECIFICATIONS: - Weight:161g (100mm) - Length: 70/80/90/100/110/120/130/140mm - Angle: -10° - Bar Clamp Diameter: 31.8mm - Steerer Tube Clamp Diameter: D-shaped OverDrive Aero, 1 1/4 inch - Stack Height: 40mm

Featuring purpose-engineered shaping, Giant’s all-new aluminum Contact SL stem is stiff, strong and ultra-light. Available in 0° and ±10°angles and eight lengths from 70 to 140mm brings superior performance to a wide range of riders. VERSATILE FIT Available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±0°/ ±10°), the Contact SL stem is perfect for any ride experience. - Super stiff, ultra-light aluminum - Compatible with all Giant OD1 and OD2 steer tubes - Integrated silhouette from stem to cone spacers - Compatible with Giant's Contact SLR/SL computer mount

- Proprietary engineering for the D-shaped steer of new generation Giant Propel - Alloy construction - Integrated aero shape from stem cap spacers to the headtube - Rounded front cap shape which connect the handlebar for improving the airflow from side angle - Square-engineered shaping achieves maximum stiffness and low weight - Simplified cable management hides all the cables underneath the stem

ULTIMATE PERFORMANCE Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°). FEATURES - Compatible with all Giant OD1 and OD2 head tubes sizes - Available in ±10° and ±20° angles - Available in eight lengths from 70 to 140mm - Purpose-engineered shaping achieves maximum stiffness and lowest weight - Integrated aero silhouette from stem cap to spacers

- Proprietary engineering for the D-shaped steer of new generation Giant Propel - Ultra-light carbon composite reduces weight while optimizing the aerodynamic shape - Integrated aero shape from stem cap spacers to the headtube - Rounded front cap shape which connect the handlebar for improving the airflow from side angle - Square-engineered shaping achieves maximum stiffness and low weight - Simplified cable management hides all the cables underneath the stem

Engineered exclusively for OverDrive Aero steerer tubes, the Contact SLR AeroLight is an ultralight and stiff composite stem that offers aero-enhancing integration, easy-to-adjust cable management, and sleek looks. FEATURES: - Works with OverDrive Aero steerer tubes only - Integrated aero design unifies the top cap, cables, and spacers with the head tube for improved aerodynamics - Ultra-light composite design delivers maximum stiffness at a superlight weight - Intuitive design guides all cables under and inside for optimized aerodynamics and sleek looks. - Fits current generation Contact Aero or Contact D-Fuse handlebars - Available in eight lengths from 80mm to 140mm SPECIFICATIONS - Weight: 123g (100mm) - Length: 70/80/90/100/110/120/130/140mm - Angle: -10° - Bar Clamp Diameter: 31.8mm - Steerer Tube Clamp Diameter: D-shaped OverDrive Aero, 1 1/4 inch - Stack Height: 44mm

Balancing design, materials, and manufacturing techniques allow the Kink Bold HRD to truly be a solid and affordable stem. The die-cast aluminum body is paired with a forged 6061-T6 aluminum cap, providing additional strength. A counterbore in the stem body allows the fork cap bolt to thread down flush for a clean look. The classic 50mm reach comes with a comfortable 32mm rise and a traditional 6-bolt system. Chamfered edges and radiused corners give the stem a clean look and knee-friendly design. TECH SPECS - Reach: 50mm - Rise: 32mm - Stack Height: 30mm - Material: Aluminum Body and Forged Aluminum Cap - Bolts: Solid w/ 6mm Allen Hex - Weight: 10.7oz

The Kink Highrise stem is CNC-machined from 6061-T6 aluminum and features a lifted top-load body design. A recessed fork cap bolt area and machined body sides create a clean look and reduce unnecessary weight. The rounded stem body and chamfered edges throughout, keep the Highrise stem as knee-friendly as possible. This stem is available in two lengths to fit your riding style or preference. TECH SPECS - Reach: 48mm and 53mm - Rise: 31.5mm - Stack Height: 30mm - Material: 6061-T6 Aluminum - Bolts: Solid w/ 6mm Allen Hex - Weight: 9.6oz (48mm)

Aero Design Stem - Handlebar Diameter: 31.8mm - Steerer Tube: 28.6mm - Stem Material: Carbon