Lighting

Stay clean and stay seen with Topeak's DeFender iGlow X. They're a unique pair of fenders with integrated 0.5W super bright red LEDs for safety at night or during low visibility conditions. The lightweight polycarbonate is tough and flexible, and the stainless steel strut attachment system is easy to install and provides adjustability for excellent tire coverage. Plus, you'll get up to 100 hours of run time on each fender's 2 coin batteries (included).

Combine Serfas’ TL-80 Wired Taillight with the powerful TSL-2500 headlight (sold separately) and you’ll be seen from all angles. It's rear rack-compatible, has a quick-release mount, and has a backpack clip to give you plenty of options. The ultra-bright, 80 lumen LEDs features several modes, including high, low, medium, overdrive, and multiple flash settings.

Coming up with ways to make you safer on the road, when using Serfas lights, is a top priority. The "BLAST" Audible Warning System emits a loud 85 Decibel signal when your light battery gets under 10-minute runtime in that specific mode. How It Works: - When the battery reaches 10 minutes of runtime, in its current mode, the light will emit a long beep followed immediately by a short beep. Sound will continue every minute. - When the power button is pressed it will put the light in the next longest running mode & it will restart the battery low alert until 10 minutes of runtime in the mode is reached. Repeat as necessary. Example: Going from highest mode to lowest mode at first beep could extend runtime up to 5 times. - Light will emit beep sound repeatedly when last minute of runtime in the current mode is reached. - While charging the light the power button will blink blue. When full charge is achieved light will beep to notify charging cycle is complete. - Light emits a beep when power button is pushed & light goes from mode to mode. Features: - "Blast" Audible Warning System Alerts Rider Of Low Battery - Lasts Up To 28 hrs on 60 Lumen Flash - Aero-Bracket Fits Almost Any Post Or Application On A Bike - 42 Micro LEDs Specs: - Solids Modes: High (200 Lumens): 1 hr, Medium (100 Lumens): 2.25 hrs & Low (60 Lumens): 3.5 hrs - Flash Modes: High Rapid (300 Lumens): 6.25 hrs, High Slow (300 Lumens): 12 hrs & Low (60 Lumens): 28.5 hrs - Weight: 55 Grams Without Bracket - Battery: USB Rechargeable Li-Polymer

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

Lumina Micro series delivers high output in a small package, making it great for helmet usage. Features a modular designed lightweight body combined with increased thermal properties ensuring a brighter, longer lasting LED and a newly designed handlebar strap mount with quick-release tab - 4 light levels plus a flash mode - Lumina Micro 900 and 650 include a VMAX+ - Lumens: 650/80 - Run time: up to 50 hrs F/up to 27 hrs R - Weight: 130g/28g

Looking for our best selling Lumina series in a smaller and lighter package? Look no further than our Micro 900. NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Its light weight at 130 grams makes it quite suitable as a helmet mountable option as well as bar compatible—standard and oversized 35mm diameters. - 900 lumen output - All New Collimator Lens, produces a generous even widespread beam - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - High output light using a CREE LED at 6000k - Ultra lightweight 900 lumen head light, weighing in at only 130g including mount - Secure on and off-road handlebar mount - Fits standard and oversize 35mm handlebars - Small compact design that’s perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 8-10 seconds to lock out operation of light. USB RECHARGEABLE The Lumina Micro 900 is USB Rechargeable. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Charge time is 2:30 hours, when plugged into a power source outputting over 500 mA and 4:30 hours when below 500 mA. MOUNTING OPTIONS Its compact profile and high light output make the Lumina Micro 900 ideal for helmet mounted applications, helmet mount available as an optional accessory. Or use handheld in Walk Mode for an amazing 60:00 hours run time. WHAT'S INCLUDED? - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable

Nightrider Lumina Pro Series features 5 light levels plus 3 Daylight Flash modes and customizable light output and flash patterns by way of NiteRider App. Compact size fits on crowded handlebars and fuel gauge provides battery life at a glance. - Collimator lens distributes an smooth even beam pattern - 5 Light Levels plus 3 Daylight Flash Modes - Customizable light output and flash patterns by way of NiteRider® App - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Fast 3 hour charge via the included USB-C AC power charging adapter - Accurate battery power management with the 8-Step Fuel Gauge

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series

The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. - All New design equipped with NiteLink Wireless Technology - Lights sold separately

Crank out those night laps and charge hard on the technical trails with NiteRider's Pro 1800 Race on your helmet or handlebars. The power-to-weight ratio is astounding with a ton of light—1800 lumens—that illuminates everything in the trail. Beyond just being lightweight and powerful, the 1800 runs from 1.5 to 25 hours depending on which of the 5 modes you use. Its powered by a Lithium-ion battery which recharges in a quick 5 hours. Plus, the eight step fuel gauge keeps you on top of battery life.

The Pro 2200 boasts one of the category's best power-to-weight ratios. With 2200 lumens of light output, using 3 CREE LEDs- set into a NiteRider custom reflector, guarantees to set the darkest bike trail ablaze. It features an accurate eight-step fuel gauge, keeping the rider informed of battery levels at all times. These attributes make the Pro 2200 the "go to" light among the world's top athletes and enthusiasts alike. - Compact and lightweight, perfect for race inspired riders - Custom 3 cone reflector producing brilliant trail illumination - 3 – class leading CREE LEDs at 6000k - Rugged design with Dupont Fiberglass reinforced nylon housings - Handlebar mount fits up to 35mm diameter bars - Helmet mountable - Lightweight 4 cell Li-Ion battery - Easily check battery power levels with the 8 step fuel gauge - FL 1 Standard IP64, dust and water-resistant - Convenient nylon storage pouch WARRANTY The Pro 2200 Race is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Headlamp - Li-Ion Battery - Helmet Mount - Handlebar Mount – Fits up to 35mm - 36" Extension Cable - AC Adapter - Nylon Storage Pouch

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

Pro Series Low Profile Helmet Mount (Not for Lumina Series Lights) System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip -TrailRat & TrailRat Select - RoadRat - Digital Patrol - Pre 2001 Systems

The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 300 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

Magicshine MJ 900S is a high power bicycle light with an updated lens, LED light source, installation, and separate battery. Can be connected to E-Bike power systems with cable (sold separately). - Lumen: 1500 (5700-6500 K) - Battery: 7.2V 2600 mAh - Waterproof: IPX 6 - Runtime: 1.5-25H - Application: Bike, E-Bike; Road, Off-Road.

MJ-902S Equipped with high efficiency, high transmittance optical lenses, producing the perfect beam pattern for your nightly adventures. Can be connected to E-Bike power systems with cable (sold separately). - Lumen: 3000 - Battery: 7.2V 7000mAh - Waterproof: IPX 6 - Runtime: 1.5-42 H - Application: Bike and E-Bike

E-Cable For SHIMANO - Length: 75cm/30inch - Compatible with MJ-90XS, ME series

GoPro/Garmin helmet and head mount with straps, compatible with GoPro action cameras, bike lights, etc. GoPro base piece with an additional.GoPro to Garmin adapteron top for compatibility with all Garmin quarter turn style devices. Included are rigid helmet straps and stretchy head bands for head mounting.

Magicshine MOH 55 Aquila Pro headlamp is equipped with the most powerful TESLA 21700 battery pack, designed for extended outdoor use. - Lumen: 4000 - USB-C PD fast charging and discharging battery pack  - IPX6 waterproof rate - Thermal throttling control

The Mini L 1.5 Smart Charger charges the 2-, 3-, and 6-cell lithium-ion batteries for the Seca and Stella lights (sold separately). Pick up an extra to top off your battery at the office. Also compatible with older 9-cell lithium-ion batteries.

Lezyne's Aluminum Helmet Mount is a durable accessory for Lezyne Mini XL, Power XL, Super XL, Deca, and Mega Drive lights. It has a stamped and machined aluminum base plate, a compression ring, a Composite Matrix spherical pivot, cradle and a Velcro strap which attaches the mount to the helmet. The spherical pivot allows the user to adjust the position of the light in all directions.

Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make/model/battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. Disclaimer: Direct X-Lock Mounting System Not compatible with all stems. Please see installation manual for stem compatibility. - 500 Lumens - Includes aluminum CNC fork and E-BIKE Stem mount - Enhanced Maximum Optical Reflection (MOR) lens - E-bike compatible 12 – 48V input - 130 cm power cable included - IPX7 water resistant - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98" Motor Compatibility - Bosch: 6V, 12V - Shimano: E5000, E7000, E6100, E6110, E9000, E8000, E8080, E6002, E6012 - Yamaha: PWse - BionX - Brose Drive S (2018) - Continental: 48V Prime, 48V Revolution

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

Lezyne's Macro Drive Duo is a compact and powerful 2-in-1 helmet light. Innovative machined aluminum body integrates front and rear LEDs with Side Visibility. Maximum of 700 lumens up front and 30 lumens in the rear. Micro-USB rechargeable with high speed 2-Amp charging capabilities. Includes versatile CM helmet mount that follows line-of-sight for optimized night riding.