Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Seatposts
$83.99 - $109.99
TruVativ's Stylo T30 Seatpost is constructed with a 1-piece 3D-forged 7050 aluminum tube to be light and strong. The sturdy dual-bolt head provides loads of adjustability so you can fine tune your saddle position.
$125.99 - $159.99
Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
$149.99
The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most.
- Carbon shaft
- Bonded Aluminum two-bolt head
$444.99
- Internal Routed, Infinitely Adjustable Design
- Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System
- Durable 3D Forged Head - With 7075-T6 Forged Clamp
- Featherlight Thumb Actuation - Industry Leading
- Intelligent Keyway System - Ensures Minimal Play
- Easiest Installation - Cable Head Attaches At Base
- Cold Weather Approved - Tested Down To -20C.
- 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware
- Remote Position: On handlebar
- Cable Routing: Internal
- Offset: 0mm
- Clamp Type: Standard, double bolt
- Seat Post Material: Aluminum
- Seat Post Weight: 510g
$1,151.99 - $1,253.99
Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components.
- Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch.
- Clean, simple and fast to install. No hoses to route, no fishing required.
- Updated internals for faster return speed in all conditions.
- New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost.
- SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components.
- Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.
$499.99 - $719.60
On leg-burning climbs, crazy fast descents and rolling technical terrain, RockShox's Reverb Stealth dropper post enables you to attack the trails like never before. Just hit the hydraulic remote lever and drop your saddle 100mm to 150mm of infinitely adjustable travel without ever slowing down! The return speed is easily adjustable by turning a dial on the remote while the triple-lipped sealing system and sealed hydraulic hose keep dirt out for clean, consistent operation. There's also an included collar that limits travel to a preferred height setting. This Reverb Stealth w/Connectamajig makes installing and removing the post easier and quicker.
$449.99 - $474.99
New Guts, New Glory
Don't let its familiar good looks fool you—Reverb is a whole new weapon. Its internals have been completely re-engineered to improve on its already legendary performance and to offer enhanced reliability: all the smallest details, down to the single seal, have been re-evaluated and updated to pass the hardest and longest durability tests. Additional bushing overlap also improves performance over time, while new 150- and 170-millimeter travel options are available to tame even the gnarliest of descents. This is the brand-new Reverb, engineered for the next-generation mountain biker.
- Internal cable routing keeps your bike sleek and uncluttered
- Completely redesigned internals with new SKF internal floating piston
- Improved performance and durability in all conditions
- 150mm and 170mm travel options available in all diameters
- Increased bushing overlap
- New dedicated post length per travel length
- WEIGHT: 560g (weight based on 340mm post, 30.9mm diameter, 100mm travel, MMX remote with shifter hardware and 1300mm hose)
- LENGTH: 340mm, 390mm, 440mm, 480mm
- COLORS: Black
- MATERIAL: Shaft: 3D forged 7050 alloy , Head: 7050 forged alloy
- OTHER: Zero Offset , Remote: Adjustable return speed at the handlebar, Discrete or Match Maker X, Left or right
$570.00 - $573.99
The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down.
- Shorter overall post length
- Stealth Internal cable routing
$540.00 - $563.50
The RockShox Reverb 1x remote pairs the ergonomics of SRAM’s shifter design and low-lever-force hydraulic actuation to the internally routed Reverb Stealth B1 so riders can use their Reverb posts quicker, more easily and often, for better ride control on the trail. Reverb's 1x Remote’s Bleeding Edge fitting makes bleeding quick and simple, with an updated fluid path and bleed porting to make it easier to push fluid through the system, and a dedicated bleed adapter that plugs into the bleed port and seals the system to minimize air contamination and fluid loss
- Adjustable return speed by turning the collar on the remote
- MatchMaker X or discrete clamp options included
- 2000mm hose length
- Adjustment: Infinite
- Remote Position: Left
$546.00
The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down.
- Shorter overall post length
- Stealth Internal cable routing
$279.99
Such Great Heights
The budget-friendly Aeffect R Dropper Post is a rock-solid, shred-ready entry into the dropper post world. Designed right to keep you on the trails and out of the shop as much as possible, you'll wonder how you ever rode without one.
It's What's Inside That Counts
The brains of this dropper post are an extremely reliable cable-actuated hydraulic cartridge that delivers infinite adjustment within its travel.
Simple Saddle Setup
A user-friendly zero-offset seatpost clamp really cuts down on the time between setting up your saddle and ripping down the trail.
$309.00 - $419.00
Saddle Up
Based on the latest FOX Transfer platform with its proven performance, the new Turbine R Dropper Post features a slick seat clamp design for reduced stack height and a 25g weight savings from the previous version. This post will treat you right.
Less is More
New, patent-pending FOX seat clamp design dramatically reduces stack height, allowing you to fit more travel into a shorter space.
Full Coverage
Proven FOX-designed internals provide infinite height adjustment, but perhaps more importantly—even easier serviceability.
No-Sweat Installation
Mounting a saddle and getting your saddle position dialed is easy thanks to the user-friendly seatpost clamp.
Brilliantly Uncomplicated
Uses standard shifter cable and housing. You know, just to keep things real. Oh yeah—it's also 25g lighter than the previous version.
- Compatible with Matchmaker
- Includes post only
- Mechanical lever actuation
- Head Type: Zero Offset—2 Bolt
- Weight: 520g
$265.00 - $284.99
The Cascade dropper post pays homage to the Cascade mountain range, home to some of the best riding in the PNW. This post is a workhorse: it’s super reliable, loved by our customers, and now features multiple travel options. The Cascade provides dependable up and down service for the miles to come, and maintenance on the Cascade is easy (like all our droppers). Plus, external routing at the mid-cap ensures your cables are kept nice and tidy during up and down actuation.
You can find sweet upgrades to the Cascade’s OG dropper design on the posts featuring 150/170mm of travel. These models have larger diameter stanchions, making them stiffer and lighter… which is sweet because who wants a bike part that’s heavy and too compliant? These longer travel models also come with an added DU bushing to combat seat wobble, because let's face it… the only thing that should be wobbly on your bike are your legs after a long ride.
Levers:
- Choose from our Loam Lever, Puget 1x or 2x drivetrain compatible levers, or Roadie/Drop Bar Lever Kit for road bars
- 1x Lever - Designed to be used with bikes using a single front chainring, this is a "shifter style" lever
- 2x lever - Designed to play nice with front shifters, this is a "vertical" lever that accommodates for the shifter on the left side of your handlebar
Product Specs:
- Choose any lever kit
- 30.9 & 31.6mm Diameters
- Weights: 125mm - 608g, 150mm - 613g, 170mm - 674g
- 2-bolt Micro Adjust Head
- Fixed External Routing at the Mid Cap for clean cable routing
- 3-year warranty!
$239.99 - $299.50
The OneUp Dropper post is available in 120mm, 150mm, 180mm and 210mm lengths and all can be shimmed down in travel by 10 or 20mm.
We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the the shortest stack height and shortest total length of any dropper post. No other post can get your saddle lower.
Starting from $199 USD with free shipping worldwide, cable actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom tune your post to dial in your perfect length.
The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp.
FEATURES
- Travel adjust shims allow you to custom tune your post to dial in your perfect length.
- Cable actuated for easy installation and a simple no bleed remote
- Ergonomic remote paddle position
- Reliable sealed cartridge internals
- User replaceable cartridge only $60 USD
- Easy to service at home
- 2 year warranty
UPDATES
- Shortest total length of any dropper
- Shortest stack height of any dropper
- New upper DU Bushing in the upper collar
- Increased bushing overlap and durability
- 100-210mm post lengths in 10mm increments.
- 20g lighter
SPECS
- Drop 120mm, 150mm, 180mm, 210mm adjustable*.
- Diameter 30.9, 31.6, 34.9
- Routing Internal only
Remote Compatibility:
- SRAM Matchmaker X - SRAM MMX clamps
- Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100
- Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only
- 22.2mm Bar Clamp - All other groups 10 speed SHIMANO
- Cable clamping remote only (post requires cable stop to be assembled at base of post)
- Travel Reducing Shim Reduces travel by up to 20mm.
Weight Post Only
- (30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g
- (31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g
- (34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g
Remote Only
- Remote with 22.2mm Bar Clamp - 46g
- Remote with SRAM Matchmaker X / I-spec-EV - 43g
- Remote with Shimano I-spec-EV - 43g
- Remote with Shimano I-spec II - 41g
- Housing and Cable (1300mm installed length) - 50g
$364.99
The lightest, longest, smoothest, and most reliable dropper post that will fit your bike.
The V3 is the lightest infinitely-adjustable dropper post on the market, it has the shortest total length and stack height of any dropper post, 20mm of adjustable travel, an extended 350-hour service interval, and new ultra-low friction IGUS® bushings and SKF® seals. Plus, save an additional 10g with our Titanium Bolt Upgrade Kit.
$159.99 - $189.99
A specific eTen hydraulic cartridge with single bolt offset saddle clamp allow the enjoyment of droppers at a low price, available with 100mm of travel.
- Black hard anodized stanchion and an air spring, hydraulically locked cartridge
- Single-bolt alloy head
- Remote sold separately
$389.00 - $419.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth.
Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper.
- Cable actuated with tool-free quick disconnect for easier installation and removal
- Low lever force provides consistent actuation pressure even with saddle weighted or unweighted
- Easy to modulate return speed with lever
- Remote lever sold separately
- 0mm offset
$379.99
The Transfer seatpost features an infinitely adjustable design with the choice of internal or external cable routing, three drop options, and two lever designs. Low lever force and great modulation make it easy to regulate return speed and small height adjustments.
- Cable actuated with tool-free quick disconnect for easier installation and removal
- Low lever force provides consistent actuation pressure even with saddle weighted or unweighted
- Easy to modulate return speed with lever
- Two remote options: left side below bar (for 1x) or left/right on bar (for 2x/3x)
- 30.9 or 31.6 diameter
- Drop options: 4in (100 mm), 5in (125 mm), 6in (150 mm)
$33.99 - $42.99
- Sturdy Cr-Mo double bolt adjustment seat clamp allows for a precise and secure hold on the saddle in any position
$33.99 - $39.99
- Sturdy Cr-Mo double bolt adjustment seat clamp allows for a precise and secure hold on the saddle in any position
$27.99 - $31.99
- Alloy seatpost with alloy bracket
- Length: 400mm
- 20mm offset
$260.00 - $369.99
The Highline 3 delivers infinite adjustment, smooth feel, and easy installation.
Details
- Premium Trelleborg sealing
- Exclusive Igus LL-glide bearings and keys
- Jagwire cable and housing
- Self-contained hydraulic cartridge delivers industry-leading quality and reliability
- Internal routing
- Quick connect mechanism for ease of cable installation
- Linear actuator for quick return speed
- 2-bolt standard head
- Remote sold separately
$459.99
The all-new Highline delivers infinite adjustment, smooth feel, and easy installation for any bike.
Details
- Shorter insertion length to fit more bikes
- Premium Trelleborg sealing
- Exclusive Igus LL-glide bearings and keys
- Jagwire cable and housing
- Self-contained IFP hydraulic cartridge
- Internal routing
- Quick connect mechanism for ease of cable installation
- Linear actuator for quick return speed
- 2-bolt quick-connect head
- Remote sold separately
$134.99
- 3D forged one piece shaft and clamp base with robust cradle and top clamp
- Length: 400mm
- Turned CNC finish with a degree of texture for a positive clamp grip
- Tough 6mm hardware, 0.5" clamp offset
- 280g (27.2mm)
$259.99 - $274.99
$259.99 - $289.99
Up to 7% Off
The latest generation Thudbuster LT is superior to its predecessor in every way. Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design.
By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made.
- Travel: 90mm
- Weight: 750g (31.6mm)
- Max Rider Weight: 250lbs
$419.99 - $549.95
$449.95 - $549.95
Up to 24% Off
3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family.
Noteworthy updates of the REVIVE 2.0 include:
- One piece 3D-forged upper tube unit for improved stiffness and strength
- Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance
- CNC-finished actuation lever for even smoother engagement
- New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation
Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike?
BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off.
Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before.
To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced.
That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of.
The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play:
- Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand.
- This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike.
So, now one might already understand that:
- No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings.
- No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design
- The hydraulic system can be reset to “new” via the unique “REVIVE-valving”
- This means the hydraulic circuit is a very stable closed system and basically maintenance free.
Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability:
- Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play.
- Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes.
1 set REVIVE dropper post includes:
- 1x REVIVE Seatpost
- 1x cable housing 1500mm
- 1x inner wire 1700mm
- 2x housing endcap
- 1x barrel cable clamp
- 1x air valve adapter
- 1x Quick-Reset-Lever
- 1x remote (optional)
- 1x BikeYoke I-spec adapter or Splits Clamp (optional)
- 1 set titanium saddle bolts and nuts (optional)
$51.99
- 45mm travel
- 30.9mm seatpost diameter
- 350mm length
- 60 to 180kg rider weight
- Adjustable suspension pre-load via hex key adjuster
- High-quality broached internal keyways provide many years of trouble-free use
- 15mm offset
- 2-bolt clamp
$21.99 - $32.99
Durable alloy construction
- Quick and easy 1-bolt adjustment
- 400mm length
$25.99 - $29.99
Lightweight and durable die-cast alloy construction
- 2-bolt clamp for maximum adjustability
- 15mm offset
- 400mm length
$419.99
- Designed using SRAM Exogram technology
- Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately)
- Matte Black finish
- Seat Post Diameter: 31.6mm
- Seat Post Length: 400mm
Page 1 of 3
Next page