The Blue Matic has been a Tacx offering for many years and is a very popular trainer. During your training session you can use the handlebar resistance lever to adjust the resistance as needed. The Tacx Blue Matic Smart is bundled with an ANT+/BT speed & cadence sensor to allow connection with tablets or smartphones, and allows use of interactive software and applications. Train with the Tacx Training app, Tacx Cycling app, Zwift, or TrainerRoad! - Stable and robust footprint - The bike is fixed in the trainer easily by two simple clicks - Handlebar resistance lever with 10 positions - Brake system with 2 X 8 permanent magnets - 2.5lbs flywheel - Maximum resistance 700 watt - Easy to assemble brake system FEATURES - Type of trainer: Basic trainer with magnetic brake - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No mains voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Race, Tri & MTB, if necessary with axle skewer, 29? wheel with Tacx trainer tire - Supplied with: Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 700 Watt - Max. slope: n.a. - Simulation of descent: No - Max. torque: 12.2Nm - Max. brake force: 36N - Flywheel: Actual of 1.25kg - Mass inertia: 8 kg (17.6 lbs) - Calibration: n.a. - Footprint (lxw): 640×635mm (25.2×25.0in) - Height: 440mm (17.3in) - Dimensions when folded: 610×420×250mm (24.0×16.5×9.84in) - Weight: 8.40kg (18.5lbs) - Article number: T2650.VP DATA OUTPUT AND CONTROL - Wireless communication: None - Control by: Handlebar resistance lever with 10 positions - Output: n.a. - Read out on: n.a. - Accuracy: n.a.
The iconic FLUX Smart has been upgraded to the FLUX 2 Smart. Compared to its predecessor, it is equipped with a bigger and stronger resistance unit and a heavier flywheel. This resulted in a wider simulation range, better ride feel and a more accurate power measurement. - 16.8 lb flywheel makes for a more realistic training experience - Maximum resistance of 2000 watt - Incline simulation up to 16% - Power measurement accuracy of 2.5% - Compatible with long-cage derailleurs - Axle compatibility: 130mm, 135mm, 142x12mm and 148x12mm - Compatible with Bluetooth and ANT + FE-C FEATURES - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator: None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Suitable cassettes: Shimano & SRAM: 8 t/m 11 speed. Campagnolo body sold separately - Suitable axles: Width of rear fork: Race 130mm, MTB 135mm, 142mm & 148mm. Adapter for 135x10mm available. - Suitable bikes: Race, Tri & MTB - Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set 142x12mm, 1 month Tacx Premium software SPECIFICATIONS - Max. power (40 km/h): 2000 Watt - Max. slope: 16% - Simulation of descent: No - Max. torque: 41Nm - Max. brake force: 120N - Flywheel: Actual of 7.6kg - Mass inertia: 31.2kg - Calibration: Spin down - Footprint (lxw): 670x642mm (26.4x25.3in) - Height: 460mm (18.1in) - Dimensions when folded: Not foldable - Weight: 23.6kg (52lbs) - Article number: T2980 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone. Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <2.5%
$54.99 - $75.00
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. Three different thread pitches ensure a perfect fit for whichever axle you're using.
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
Use CycleOps' Training Mat to protect your floors and carpets from bike grime, sweat, and trainer wear. Durable and water proof, the Training Mat helps keep your trainer from moving across the floor and it absorbs vibration and noise.
Feel the smooth precision of the lathe-turned-aluminum drums on CycleOps’ Aluminum Rollers with Resistance. Five levels of resistance allow you to knock out hard efforts and the durable steel frame stands up to years of hard training, indoors or out. Plus, the folding design allows convenient storage and transport. The rollers feature an adjustable belt for right and left dismounting, an easily-adjusted wheelbase and a limited lifetime warranty.
Find fitness with CycleOps' Fluid2 Trainer Kit. The Fluid2 utilizes Power Band technology to generate distinct fluid resistance changes seamlessly without the use of a lever. The large flywheel delivers a smooth, realistic road feel while sturdy legs provide a stable platform for pumping out hard, 600-watt efforts and out-of-the-saddle climbs. A favorite among serious racers, the Fluid2 is easily transportable and stands up to repeated punishment by the burliest of legs for years of impressive performance. Two climbing blocks are stackable to simulate steep grades, a RealRides training DVD will keep you motivated, and the Trainer Mat and Bike Thong sweat guard protect your equipment and floor.
Page 1 of 1