Other

2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount

This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.

- Specific protector for fork mount carriers - Protects bike from dirt, Bugs and extreme weather while transporting bike on roof rack - Coated nylon cover keeps seat dry, Includes nylon storage bag

Zipp Vuka / Stealth Riser Kits - Bolt kits sold separately

Replacement sliding bridge clip for Chromoplastic Longboard and Commuter II fenders. The replacement clips are made of aluminum with an adjustable bottom so they can be clamped onto the fender. - The 35mm clip works with 35mm fenders. - The 45mm clip works with 45mm fenders. - The 55mm clip works with 50-55mm fenders. - The 65mm clip works with 65mm fenders.

U-Stay Mounting Clamp for Velo Fenders, Bluemels 75U and 75U Long, and Edge AL Fenders.

Fork Adapter for Suntour/RockShox Offset allows full fender or Velo fender stays to be mounted to the Suntour, RockShox, or other forks with unique mounting systems.

Fork Adapter for Suntour/RockShox Straight allows full fender or Velo fender stays to be mounted to the Suntour, RockShox, or other forks with unique mounting systems.

Hook-and-loop straps for Speedrocker, Mudrocker, and VeloFlexx. - Fenders include straps - Replacement only

Replacement SKS Rubber Straps for RacebladePro and S-Board

U-Stay Kit for Edge AL Fenders are available as replacement sets.

This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.

Bridge and mounting bracket for the VeloFlexx 55 and 65 Fenders

Front and Rear SKS V-Brace Fender Stay Set with Drawbolts

Protect your chainstay and other wear areas from harsh chainslap and other frame damage maintaining your bike's strength and beauty. The rubberized strip is 50mm wide and each roll is 1000mm long. Wrap up the stay or trim a custom shape to protect the frame. RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar. - Matte black finish - Fits all makes, models, and sizes - Protects from harsh chainslap and other damage - 50mm x 1000mm roll - Designed around mountain bike geometry - Kit includes instructions and pre-install cleaning wipe

For riders who are carrying their bike over the tailgate of a truck. Even with a tailgate pad, which is designed to protect the vehicle and not the bike, damage will occur on the downtube when shuttling without protection. The Shuttle Armor is designed to protect the downtube during transport on the roughest access roads. RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar. - Matte black finish - Fits all makes, models, and sizes - Protects from harsh tailgate rub - Designed around mountain bike geometry - Kit includes instructions and pre-install cleaning wipe

- Extended length down tube piece to protect this high risk area from rock chips, wear & scratches - Fits all makes, models and sizes - Designed around mountain bike geometry - Frame coverage ~10%. Includes downtube and extra pieces - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed

For the rider who wants a higher durability level of protection for the high-risk downtube region of their frame. Perfect for preventing acute damage plus wear and tear on the downtube. Downtube protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the downtube of the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails and shuttling. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Nearly twice as thick as our regular film - Fits all makes, models, and sizes - Designed around mountain bike geometry - The Essential Downtube Kit includes protection for downtube and extra pieces to provide approximately 10% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

Most riders should protect the lowers and crowns of their Road & Gravel forks. Fork protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the fork. RideWrap protection kits are high-quality polyurethane films that are applied to the fork to protect lowers and crowns from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - The Covered Fork Kit includes protection for crowns, lowers, and extra pieces to provide approximately 60% fork coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

Most riders should protect the lowers and crowns of their MTB forks. Fork protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the fork. RideWrap protection kits are high-quality polyurethane films that are applied to the fork to protect lowers and crowns from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - The Covered Fork Kit includes protection for crowns, lowers, and extra pieces to provide approximately 60% fork coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

For the price point rider who wants a core level of protection for key areas of their frame. Perfect for preventing damage from cable rub and acute wear and tear. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed around mountain bike geometry - The Essential MTB Frame Kit includes protection for toptube, downtube, 4 stays, and extra pieces to provide approximately 30% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

For riders looking for comprehensive coverage to protect high risk areas of a Hardtail MTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10 year warranty. - Matte clear film - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Designed around hardtail mountain bike geometry - The Hardtail MTB Kit includes protection for toptube, full downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

For riders looking for comprehensive coverage to protect high risk areas of a Road or Gravel frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails and roads. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around road and gravel bike geometry - The Covered Road & Gravel Kit includes protection for toptube, full downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker-sheet

- Protects high risk areas from rock chips, wear & scratches - Designed around hardtail steel mountain bike geometry - Fits all makes, models and sizes - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed

- Additional holder to use the same baby seat on different bicycles - Compatible with Guppy Mini, Bubbly Mini+ and Bilby Junior - Not compatible with rear seat - Baby Seat Mount Type: Stem/Steerer mount - For round tubes only - Position: Front

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

Park's Pizza Tool is the perfect gift for the cyclist who has it all. It's a quality pizza cutter reminiscent of classic highwheelers that has a blade sharp enough to slice through the roughest terrain. This great tool also includes a display stand and gift box. Never use a run-of-the-mill pizza cutter again.

Made of aluminum and embossed with the “Bicycle Tools” label. Dimensions: 26.5 x 6.5-inches

The STL-3K is kit that will add a back rest to the STL-1.2 work stool (sold separately). The STL-3K includes a back rest, two steel support bars, and fasteners. NOTE: The STL-3K will only work on the STL-1.2 work stool. The previous STL-1 work stools will not accept the STL-3K