Stems

- Highly weight optimized single crown stem for use with 35mm handlebars - Dial your fit with micro increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike Specs: - Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included - Material: 6-Series Alloy, 3D forged CNC optimized body - Rise (°): 0 - Diameter: 35mm - Stack height: 34mm - Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm) - Finish: Shotpeen anodized

Salt Plus Manta stem. - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8" ins - Stem Type: Top Load

High rise design with STC (Shark Tooth Clamping) inside the stem to help grip the bars. Central bore for reduced weight, unique side pocket detail. - 6061-T6 alloy - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8-inch - Weight (oz): 10.61 - Stem Type: Front Load

- Fully CNC machined - Featuring an oversize center bore - Extensive machining and external webbing to maximize structural strength and stiffness and minimize weight

- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts

- CNC machined 6082 aluminum body - 7075 aluminum clamps - Unique 240-deg C-shape clamps - Minimal 6-bolt design - U-shape cradle clamp eliminates handlebar stress raisers found with traditional stems - Ultra-wide 64mm clamp width

An adjustable stiffness suspension stem that smooths out the ride by reducing the affects of impacts and road vibrations. - Unwanted vertical movement is absorbed by twin interchangeable elastomers - Stem retains torsional rigidity - Travel is limited to 1-2 centimeters - Made with 6061-T6 Aluminum - Includes 5 swappable elastomers (2 pre-installed, 3 additional) to customize the ride feel for your bike, weight, and riding style

The new ShockStop PRO Stem blends seamlessly with the aesthetic of modern bikes, while reducing fatigue and strain. Along with the ShockStop Suspension Seatpost, this system works together to suspend the rider and smooth out rough terrain on the bike you already own, making your ride smoother, faster, and more comfortable. Benefits: - Go further—reduce fatigue from bumps and vibrations - Ride faster—energy that is normally wasted suspending your body is converted into forward motion - Take control—customize your suspension feel to float over obstacles and maintain control over rough terrain - GPS and Utility Mounts sold separately Details: - Titanium Hardware - 15% Reduction in Weight over standard ShockStop - Refined premium finish - The ShockStop Stem in available in +/-6 degree angle with 80mm, 90mm, 100mm, 110mm, and 120mm lengths - Effective suspension travel: up to 20mm - Includes 5 swappable elastomers to fine tune your riding style - Check technical specs for compatibility What's in the Box: - 1 x ShockStop PRO Stem - 5 x swappable elastomers (2 pre-installed, 3 additional in box) - All required hardware

Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.

Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation

Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

Every Profile Design product is perfectly optimized to minimize aerodynamic drag. So, it's no surprise that Profile's Aeria Stem has hidden bolts and a low profile faceplate to smooth oncoming air. The sculpted shape is constructed from strong, lightweight forged aluminum, and the 17-degree drop ensures an aerodynamic fit on your time trial or triathlon bike.

Entirely manufactured in the UK, this brand new stem combines precision engineering, function-led form and our trademark commitment to sustainability. Custom-made stainless steel bolts ensure that the no-gap face plate is perfectly aligned; critical in protecting the handlebar and delivering strong, consistent clamping force. Machined in our factory in the south of England. The VFS Stem body and face plate is made from UK-sourced aluminium that has a minimum of 75% recycled content, making this the most environmentally-friendly stem on the market. Specifications: - Stem: 75% recycled aluminium manufactured by PEMBREE - Bolts: Custom UK-made stainless steel, manufactured by Precision Products - Environment: Carbon Neutral - Length: 35mm - Handlebar: 35mm - Rise: 0 degree - Weight: 148g - Warranty: 5 Years - Certification: EFBE Tri-Test Certified

There’s something about 7/8" (aka 22.2mm) handlebars that seem to attract the most abusive riders out there, so we’ve taken our popular Boxcar stem and beefed it up even further! We already use 2024 alloy for all of our boxcar stems, as it has a higher fatigue and yield strength than 6061. We made sure the clamp was extra thick on this version and even added 2 more high-strength stainless faceplate screws. Is it overkill? Definitely. You’d have to run this thing over in a tank to damage it, but we’re pretty sure this will be the last 7/8" stem you’ll ever have to buy. - Machined in sunny Chico, California - 6 bolt faceplate (stainless T25 bolts) - 7/8" (22.2mm) bar clamp - Stack height: 36mm - 180g

The perfect combination of stiffness, strength and reasonable weight. - Made in Chico, CA with US sourced 2024 aircraft alloy - High strength stainless steel T25 bolts - 35.0mm bar clamp - Stack height: 36mm - 118g

Joining our Carbon Handlebar is the OneUp Stem. Designed for everything from trail riding to Enduro racing. The OneUp Stem can be used with a regular star nut and top cap like every other stem. It’s also compatible with existing threaded EDC top caps, for people who’ve already threaded their steerer tube. SPECS - Length: 35mm (155g) 50mm (173g) / 35mm Dia. / 0° Rise - Colour: Black. - Stack Height: 39mm - Bar Clamp Width: 55mm - Material: 6061-T6 Aluminum

The Eternal stem impresses with its uniquely filigree, yet wide and aggressive look, as well as its technical values. Made from high-strength aircraft-grade aluminum, it's made to last. With a clamping width of 55 mm, the Eternal ensures optimal rigidity in the cockpit, but is still compatible with almost all carbon handlebars. Due to the length of 35 mm, your steering movements are transmitted directly. Includes: - Eternal Stem 35mm - Oak Components ahead cap - Stem Bolts in Silver & Black (6 pcs each) - Silver ahead cap screw - Signature Oak stickers - User manual Specifications: - Handlebar clamp: 35 mm - Stem Length: 35mm - Weight: 144 g (without top cap) - Handlebar clamping width: 55 mm - Clamp height steerer tube: 39.2 mm - Weight approval: 130 kg - ASTM tested: Category 6

After a delay, the king is back. We've updated the NSB Overlord stem to accommodate 35mm diameter handlebars. A wider clamp area and refined shape improve strength while retaining what we feel are the correct proportions. Still, light enough to pedal all day and strong enough to tackle full days in the Whistler Bike Park. The 35mm diameter stem is available in 35mm and 40mm lengths and will be available in all colors for the smaller Overlord. Specifications: - Clamp Size: 35mm handlebar - Fork Steerer Tube: 1 1/8? - Rise: 0-degree - Stack Height: 38mm - Hardware: 8.8 Grade Gold Zinc plated M6 bolts - Precision CNC Machined in Whistler, B.C. Weight: 35mm – 190g 40mm – 196g

Top-load design stem with a 6061 aluminum cast body and cold-forged cap for added strength. Recessed sides and front make the Control Stem simple, sleek, and lightweight. The traditional 50mm reach and generous 32mm rise make for a comfortable ride. Product Specifications - Material: 6061 Aluminum - Reach: 50mm - Rise: 32mm - Stack Height: 30mm - Bolts: M8 x P1.25 6mm - Weight: 10.4oz

Aero Design Stem - Handlebar Diameter: 31.8mm - Steerer Tube: 28.6mm - Stem Material: Carbon

LOOK Design Stem - Handlebar Diameter: 31.8mm - Steerer Tube: 28.6mm - Stem Material: Carbon

Balancing design, materials, and manufacturing techniques allow the Kink Bold HRD to truly be a solid and affordable stem. The die-cast aluminum body is paired with a forged 6061-T6 aluminum cap, providing additional strength. A counterbore in the stem body allows the fork cap bolt to thread down flush for a clean look. The classic 50mm reach comes with a comfortable 32mm rise and a traditional 6-bolt system. Chamfered edges and radiused corners give the stem a clean look and knee-friendly design. TECH SPECS - Reach: 50mm - Rise: 32mm - Stack Height: 30mm - Material: Aluminum Body and Forged Aluminum Cap - Bolts: Solid w/ 6mm Allen Hex - Weight: 10.7oz

The Kink Highrise stem is CNC-machined from 6061-T6 aluminum and features a lifted top-load body design. A recessed fork cap bolt area and machined body sides create a clean look and reduce unnecessary weight. The rounded stem body and chamfered edges throughout, keep the Highrise stem as knee-friendly as possible. This stem is available in two lengths to fit your riding style or preference. TECH SPECS - Reach: 48mm and 53mm - Rise: 31.5mm - Stack Height: 30mm - Material: 6061-T6 Aluminum - Bolts: Solid w/ 6mm Allen Hex - Weight: 9.6oz (48mm)

Optimised for the perfect balance of weight and stiffness. Gone are the days that XC meant noodly handling. Our new stem is designed to cope with the extremes of a modern XC race course, without carrying so much as an extra gram of weight. Whether crossing continents, or smashing laps, we’ve got your back. KEY FEATURES - Available in 70mm or 90mm, 0° rise - CNC machined from 2014-T6 aluminium - Titanium bolt upgrade kit available - Stainless Steel bolts: 136g 70mm // 149g: 90mm - Ti bolt upgrade kit // 124g 70mm // 137g: 90mm - Available in black, silver, bronze, red, blue, orange & purple - Proudly Designed, Tested and Manufactured in Barnoldswick, UK

With the increase in longer travel trail bikes tailored to gravity riding we saw a requirement for a new stem. The perfect combination of lightness and stiffness, the Gravity stem weighs 38 grams heavier than the AM but much stiffer than the previous DH stem. KEY FEATURES - All stems are CNC machined from a solid billet of 2014 T6 aluminium - The Gravity stem range has been designed to be stiffer than the AM stem - The new design incorporates individual clamps for the handle bars and a simple “no gap” clamping system. - Optimum machining to give lightest weight without compromising stiffness - Available in black, silver, bronze, red, blue, purple & orange - Weight from: 156g - CNC machined from 2014 T6 aluminium - Designed for oversized 31.8mm and 35mm bars - Lengths- 35mm & 50mm - Available 0 degree rise

Our direct mounted stem helps keep the front end of your bike low and keeps weight down. For use with triple clamp forks KEY FEATURES - Machined from a solid billet of 2014 T6 aluminium - Fits directly to original triple clamp fork crown - Zero rise - 67mm Clamping width - Stainless Steel Taper head screws - Weight from: 132g - CNC machined from 2014 T6 aluminium - 31.8mm available in 40mm & 50mm lengths - 35mm available in 41.5mm & 50mm lengths - Available in black, silver, bronze, red, blue, purple & orange - Compatible with: 2009 onwards FOX40 models / All Rock Shox Boxxer models / 2013 onwards Marzocchi 888 and 380 models

- 3D forged 6061 aluminum alloy body with oversize box cross-section - 46mm wide 6061 alloy faceplate - Steel hardware - Not OD2, regular 1-1/8"

- 3D forged 2014 aluminum alloy with oversized box cross-section - Oversize 46mm wide 6061 alloy faceplate - Steel hardware - 1-1/8" steerer adapter included

Made for round 1 1/8 inch steerer tubes, the Contact AeroLight is a lightweight stem that offers easy-to-adjust integrated cable routing for drop or flat bar bikes. FEATURES: - Compatible with OD1 (1-1/8") steerer tube - 31.8mm round handlebar clamp diameter - Face plate center bolts guide cables under the handlebar into the side of the stem - Integrated aero silhouette unites the stem cap, spacers and head tube - Streamlined shaping and lightweight alloy deliver maximum stiffness at a light weight. - Easy cable management guides all cables under and inside for optimized aerodynamics and a clean look -10 degree angle - Available in eight lengths from 80mm to 120mm SPECIFICATIONS: - Weight: 190g (100mm) - Length: 70/80/90/100/110/120mm - Angle: -10 degree only when used on 2024+ Defy and Avail Advanced models - Bar Clamp Diameter: 31.8mm - Steerer Tube Clamp Diameter: Round, 1 1/8 inch - Stack Height: 40mm

- 3D forged, 6061 aluminum alloy body with oversize box cross-section - Oversized 52mm wide 6061 alloy faceplate - 35mm handlebar clamp diameter - Not OD2, regular 1-1/8"

- Giant's advanced alloy manufacturing process for a 35mm clamp diameter with maximized strength at minimal weight. - Not OD2, regular 1-1/8".

- Adjustable stem to fit RideDash EVO display - Ahead style

Engineered exclusively for OverDrive Aero steerer tubes, the Contact SL AeroLight stem is a lightweight and stiff alloy stem featuring easy-to-install cable integration for optimal aerodynamics and a clean look. FEATURES: - Made for OverDrive Aero steerer tubes only. - Integrated aero silhouette unites the stem cap, spacers, and head tube for aerodynamic advantage. - Ultra-light alloy design delivers maximum stiffness at a super lightweight. - Easy cable management guides all cables under and inside for optimized aerodynamics and a clean look. - Fits current generation Contact Aero or Contact D-Fuse handlebars. - Available in eight lengths from 80mm to 140mm. SPECIFICATIONS: - Weight:161g (100mm) - Length: 70/80/90/100/110/120/130/140mm - Angle: -10° - Bar Clamp Diameter: 31.8mm - Steerer Tube Clamp Diameter: D-shaped OverDrive Aero, 1 1/4 inch - Stack Height: 40mm

Featuring purpose-engineered shaping, Giant’s all-new aluminum Contact SL stem is stiff, strong and ultra-light. Available in 0° and ±10°angles and eight lengths from 70 to 140mm brings superior performance to a wide range of riders. VERSATILE FIT Available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±0°/ ±10°), the Contact SL stem is perfect for any ride experience. - Super stiff, ultra-light aluminum - Compatible with all Giant OD1 and OD2 steer tubes - Integrated silhouette from stem to cone spacers - Compatible with Giant's Contact SLR/SL computer mount

- Proprietary engineering for the D-shaped steer of new generation Giant Propel - Alloy construction - Integrated aero shape from stem cap spacers to the headtube - Rounded front cap shape which connect the handlebar for improving the airflow from side angle - Square-engineered shaping achieves maximum stiffness and low weight - Simplified cable management hides all the cables underneath the stem

ULTIMATE PERFORMANCE Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°). FEATURES - Compatible with all Giant OD1 and OD2 head tubes sizes - Available in ±10° and ±20° angles - Available in eight lengths from 70 to 140mm - Purpose-engineered shaping achieves maximum stiffness and lowest weight - Integrated aero silhouette from stem cap to spacers

- Compatible with Giant's proprietary Overdrive Aero steerer tube - Ultra-light carbon composite reduces weight while optimizing the aerodynamic shape - Integrated aero shape achieves maximum stiffness while attaining low weight - Simplified cable management hides all the cables underneath the stem - Weight (g)133/138/143/148/153/158/163/168 - Length (mm)80/90/100/110/120/130/140 - Angle±10° - Bar Clamp Dia. (mm)31.8 - Stack Height (mm)40

Engineered exclusively for OverDrive Aero steerer tubes, the Contact SLR AeroLight is an ultralight and stiff composite stem that offers aero-enhancing integration, easy-to-adjust cable management, and sleek looks. FEATURES: - Works with OverDrive Aero steerer tubes only - Integrated aero design unifies the top cap, cables, and spacers with the head tube for improved aerodynamics - Ultra-light composite design delivers maximum stiffness at a superlight weight - Intuitive design guides all cables under and inside for optimized aerodynamics and sleek looks. - Fits current generation Contact Aero or Contact D-Fuse handlebars - Available in eight lengths from 80mm to 140mm SPECIFICATIONS - Weight: 123g (100mm) - Length: 70/80/90/100/110/120/130/140mm - Angle: -10° - Bar Clamp Diameter: 31.8mm - Steerer Tube Clamp Diameter: D-shaped OverDrive Aero, 1 1/4 inch - Stack Height: 44mm

FSA's Omega line is the perfect workhorse component group for the sport rider who wants race-winning technology and durability along with classic good looks. - 3D-forged and CNC-machined from AL6061/T6 - 4-bolt cold-forged face plate - Chromoly hardware - ±6° - 31.8mm handlebar clamp diameter - 35mm fork clamp stack height - 127 grams (100mm)

- 3D forged and CNC machined from AL6061/T6 - 4-bolt cold-forged front clamp - 40 mm fork clamp stack height - Weight: 144 g (100 mm)

- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)

- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 25.4mm handlebar clamp - M6 Black hardware - Weight: 161g (110mm)

- Forged alloy construction - Adjusts from 0 to +/- 60° - 31.8mm, shims included to fit 25.4mm handlebar

- Lightweight aluminum construction - Adjusts from 0° to 60° - 25.4mm handlebar clamp - 475g

- Forged alloy adjustable stem - Adjusts from 0° to 50° - 370g

Electra's Cruiser Aluminum Stem is a stable, solid replacement for your original equipment. Designed to work with a 1-inch headset, the Cruiser Stem is made from no-frills aluminum that keeps off the weight while maintaining strength where you need it.

Get back on the road with a genuine replacement stem. Original replacement stem for your Electra. PRODUCT DETAILS - Quill stem for threaded forks - Original equipment for select Electra models

Get back on the road with a genuine replacement stem. Original replacement stem for your Electra. PRODUCT DETAILS - Includes 6 socket screws - Intended to be used on Electra Ponto Go! - Star nut and star nut screw not included

Get back on the road with a genuine replacement stem. Original replacement stem for your Electra. PRODUCT DETAILS - Original equipment replacement for Super Deluxe tandem 7i bikes - Adjustable stem length

Introducing the Onyx stem. Using cold forging technology rather than CNC machining, this stem has an incredibly smooth and unique shape but also strength advantages over a traditional CNC machined stem. - Cold-forged deisgn for strength, asthetics and value - Weight saving internal machining - STC (Shark Tooth Clamping) for increased grip - Steerer Clamp Diameter: 1-1/8" ins - Weight (oz): 11.15 - Stem Type: Top Load

Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.

The Cavity stem was developed with pain staking focus on strength, function and attention to detail. Tapered body for cleaner lines and weight reduction, multiple internal and external machining processes to reduce every gram possible and chamfered edges throughout for stunning detail.

Inspired by the aggressive lines and flowing silhouette of our favorite muscle cars, the all-new INTAKE 35mm DIRECT MOUNT DH Stem is both fast and furious! This beauty is the perfect match for our Racepoint Handlebar, and together they are unlike anything you've seen. Delivering unmatched strength, style, and attention to detail, this super-stiff design showcases the refined direction DEITY is heading. Make no mistake, the added control and response of the ultra-wide 69mm clamping platform will take seconds off your time. - DIRT MAG Top 100 Product for 2018 - Featuring a 50mm reach - Zero degree rise to keep you low and in control - CNC Machined from a solid block of aluminum - Boxxer Standard platform - 7075 T73 Aluminum - Available in high polished black ano finish - 69mm wide clamping platform for an incredibly stiff front end - Covered by our Lifetime Crash Replacement Policy to the original owner - 145 grams

Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem. - Designed for all applications from All MTN to Slopestyle and anything in between - CNC Machined from a solid block of 6061 T6 Aluminum - Exceptionally detailed chamfered edges and channels throughout - 55mm wide clamping platform

- CNC Machined from hard high grade 7075 T73 Aluminum - 0 deg rise to keep you low and in control - 69mm wide clamping platform for an incredibly stiff front end - Intended Use: Downhill

The Defy MTB stem is the perfect choice for your Trail/All-Mountain build. It features a low stack height, Top-Close clamp design, wide clamping area for bar stability, and an internal steerer clamp to keep your knees safe out on the trail. - CNC machined, 6061 Alloy - Top-Close clamp design - Stem cap included

- 6061 premium alloy - Designed to be light and strong - Enduro/DH focused - 31.8 & 35mm clamp

Chromag's HiFi stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 200 grams - Low stack height

Chromag's HiFi V2 stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 175 grams (35mm length) - Low stack height