Bikes

The Ripley AF is our beloved, category-defying, short-travel, singletrack-scorching Ripley - rendered in aluminum, with more aggressive geometry. All the sizzle and pop of the carbon Ripley, now available as a complete bike at a wallet friendly price.

The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29" trail bike. Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra-efficient dw-link travel means it's equally happy popping off bonus lines as it is crushing all-day epics. LONGER, SLACKER, STEEPER With its well bal­anced mod­ern geom­e­try, the Rip­ley is ready for any adven­ture. The long front end, slack head angle, and short rear end gives you the con­fi­dence to try new lines, while the steep seat tube angle and short­er-off­set fork make it easy to maneu­ver tech­ni­cal climbs and flowy singletrack. DW LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, that has been proven repeat­ed­ly at the high­est lev­els of racing. LONG DROPPER POST We use names like small, medi­um, and large to describe our siz­ing because it's easy to under­stand, but our ultra-low standovers and clear­ance for long drop­pers give you the abil­i­ty to size based on reach. LIGHTWEIGHT PREMIUM CARBON, FOR EVERYONE Whether you order an XTR or NX kit, you'll get the same pre­mi­um car­bon fiber frame. All our bikes are built from the high­est grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance. The Rip­ley weighs 5 lbs with­out the shock. FORK OFFSET Some­times, short­er is bet­ter. Instead of the typ­i­cal 51mm off­set, the new Rip­ley uses a 44mm off­set. This gives you the sta­bil­i­ty of a slack­er head angle while retain­ing the BMX like feel of, well, a Ripley. 2.6" TIRE CLEARANCE We pio­neered the wide rim rev­o­lu­tion a few years ago and inspired a new crop of wider 2.4" – 2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures that pro­duce elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing speed. REMOVABLE ISCG05 MOUNT There if you want it, remov­able if you don't. INTERNAL CABLE TUNNELS Inter­nal cable rout­ing used to be a pain in the ass, but our inter­nal tubes make rout­ing easy. Just pop the hous­ing through and it comes out the oth­er end, no need for swear words or a pickset. REPLACEABLE DOWNTUBE PROTECTOR Our remov­able poly­car­bon­ate skid plate pro­tects your down­tube from sharp pointy things.

The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29" trail bike. Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra-efficient dw-link travel means it's equally happy popping off bonus lines as it is crushing all-day epics. LONGER, SLACKER, STEEPER With its well bal­anced mod­ern geom­e­try, the Rip­ley is ready for any adven­ture. The long front end, slack head angle, and short rear end gives you the con­fi­dence to try new lines, while the steep seat tube angle and short­er-off­set fork make it easy to maneu­ver tech­ni­cal climbs and flowy singletrack. DW LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, that has been proven repeat­ed­ly at the high­est lev­els of racing. LONG DROPPER POST We use names like small, medi­um, and large to describe our siz­ing because it's easy to under­stand, but our ultra-low standovers and clear­ance for long drop­pers give you the abil­i­ty to size based on reach. LIGHTWEIGHT PREMIUM CARBON, FOR EVERYONE Whether you order an XTR or NX kit, you'll get the same pre­mi­um car­bon fiber frame. All our bikes are built from the high­est grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance. The Rip­ley weighs 5 lbs with­out the shock. FORK OFFSET Some­times, short­er is bet­ter. Instead of the typ­i­cal 51mm off­set, the new Rip­ley uses a 44mm off­set. This gives you the sta­bil­i­ty of a slack­er head angle while retain­ing the BMX like feel of, well, a Ripley. 2.6" TIRE CLEARANCE We pio­neered the wide rim rev­o­lu­tion a few years ago and inspired a new crop of wider 2.4" – 2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures that pro­duce elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing speed. REMOVABLE ISCG05 MOUNT There if you want it, remov­able if you don't. INTERNAL CABLE TUNNELS Inter­nal cable rout­ing used to be a pain in the ass, but our inter­nal tubes make rout­ing easy. Just pop the hous­ing through and it comes out the oth­er end, no need for swear words or a pickset. REPLACEABLE DOWNTUBE PROTECTOR Our remov­able poly­car­bon­ate skid plate pro­tects your down­tube from sharp pointy things.

The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29” trail bike. Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra efficient dw-link travel, means it’s equally happy popping off bonus lines as it is crushing all day epics.

The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29” trail bike. Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra efficient dw-link travel, means it’s equally happy popping off bonus lines as it is crushing all day epics.

The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29" trail bike. Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra-efficient dw-link travel, means it's equally happy popping off bonus lines as it is crushing all-day epics. LONGER, SLACKER, STEEPER With its well bal­anced mod­ern geom­e­try, the Rip­ley is ready for any adven­ture. The long front end, slack head angle, and short rear end gives you the con­fi­dence to try new lines, while the steep seat tube angle and short­er off­set fork makes it easy to maneu­ver tech­ni­cal climbs and flowy singletrack. REVISED SWINGARM The Rip­ley V4S fea­tures a new UDH dérailleur for max­i­mum future com­pat­i­bil­i­ty and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay. DW LINK Since 2005, we've part­nered with sus­pen­sion guru Dave Wea­gle on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, that has been proven repeat­ed­ly at the high­est lev­els of racing. LONG DROPPER POST We use names like small, medi­um, and large to describe our siz­ing because it's easy to under­stand, but our ultra-low stan­dovers and clear­ance for long drop­pers give you the ability to size based on reach. LIGHTWEIGHT PREMIUM CARBON, FOR EVERYONE Whether you order an XX1 or SLX kit, you'll get the same pre­mi­um car­bon fiber frame. All our bikes are built from the high­est grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance. The Rip­ley weighs 5 lbs without shock. FORK OFFSET Some­times, short­er is bet­ter. Instead of the typ­i­cal 51mm off­set, the new Rip­ley uses a 44mm off­set. This gives you the sta­bil­i­ty of a slack­er head angle while retain­ing the BMX like feel of, well, a Ripley. 2.6" TIRE CLEARANCE We pio­neered the wide rim rev­o­lu­tion a few years ago and inspired a new crop of wider 2.4"?- ?2.6" tires. When paired together, this com­bo can be run at ultra-low pres­sures that pro­duce elbow-drag­ging cor­ner­ing trac­tion without sac­ri­fic­ing speed. REMOVABLE ISCG05 MOUNT There if you want it, remov­able if you don't. INTERNAL CABLE TUNNELS Inter­nal cable rout­ing used to be a pain in the ass but our inter­nal tubes make rout­ing easy. Just pop the hous­ing through and it comes out the other end, no need for swear words or a pickset. PROTECT YOUR INVESTMENT A thick rub­ber down­tube pro­tec­tor deflects debris, while our chain­stay pro­tec­tor fea­tures thick raised sec­tions to help damp­en chain slap noise. And our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful. LIFETIME WARRANTY If it's our fault, we'll fix it. Sim­ple as that.

The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29" trail bike. Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra-efficient dw-link travel means it's equally happy popping off bonus lines as it is crushing all-day epics. LONGER, SLACKER, STEEPER With its well bal­anced mod­ern geom­e­try, the Rip­ley is ready for any adven­ture. The long front end, slack head angle, and short rear end gives you the con­fi­dence to try new lines, while the steep seat tube angle and short­er-off­set fork make it easy to maneu­ver tech­ni­cal climbs and flowy singletrack. DW LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, that has been proven repeat­ed­ly at the high­est lev­els of racing. LONG DROPPER POST We use names like small, medi­um, and large to describe our siz­ing because it's easy to under­stand, but our ultra-low standovers and clear­ance for long drop­pers give you the abil­i­ty to size based on reach. LIGHTWEIGHT PREMIUM CARBON, FOR EVERYONE Whether you order an XTR or NX kit, you'll get the same pre­mi­um car­bon fiber frame. All our bikes are built from the high­est grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance. The Rip­ley weighs 5 lbs with­out the–shock. FORK OFFSET Some­times, short­er is bet­ter. Instead of the typ­i­cal 51mm off­set, the new Rip­ley uses a 44mm off­set. This gives you the sta­bil­i­ty of a slack­er head angle while retain­ing the BMX like feel of, well, a Ripley. 2.6" TIRE CLEARANCE We pio­neered the wide rim rev­o­lu­tion a few years ago and inspired a new crop of wider 2.4" – 2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures that pro­duce elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing speed. REMOVABLE ISCG05 MOUNT There if you want it, remov­able if you don't. INTERNAL CABLE TUNNELS Inter­nal cable rout­ing used to be a pain in the ass, but our inter­nal tubes make rout­ing easy. Just pop the hous­ing through and it comes out the oth­er end, no need for swear words or a pickset. REPLACEABLE DOWNTUBE PROTECTOR Our remov­able poly­car­bon­ate skid plate pro­tects your down­tube from sharp pointy things.

The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29" trail bike. Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra-efficient dw-link travel means it's equally happy popping off bonus lines as it is crushing all-day epics. LONGER, SLACKER, STEEPER With its well bal­anced mod­ern geom­e­try, the Rip­ley is ready for any adven­ture. The long front end, slack head angle, and short rear end gives you the con­fi­dence to try new lines, while the steep seat tube angle and short­er-off­set fork make it easy to maneu­ver tech­ni­cal climbs and flowy singletrack. DW LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, that has been proven repeat­ed­ly at the high­est lev­els of racing. LONG DROPPER POST We use names like small, medi­um, and large to describe our siz­ing because it's easy to under­stand, but our ultra-low standovers and clear­ance for long drop­pers give you the abil­i­ty to size based on reach. LIGHTWEIGHT PREMIUM CARBON, FOR EVERYONE Whether you order an XTR or NX kit, you'll get the same pre­mi­um car­bon fiber frame. All our bikes are built from the high­est grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance. The Rip­ley weighs 5 lbs with­out the shock. FORK OFFSET Some­times, short­er is bet­ter. Instead of the typ­i­cal 51mm off­set, the new Rip­ley uses a 44mm off­set. This gives you the sta­bil­i­ty of a slack­er head angle while retain­ing the BMX like feel of, well, a Ripley. 2.6" TIRE CLEARANCE We pio­neered the wide rim rev­o­lu­tion a few years ago and inspired a new crop of wider 2.4" – 2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures that pro­duce elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing speed. REMOVABLE ISCG05 MOUNT There if you want it, remov­able if you don't. INTERNAL CABLE TUNNELS Inter­nal cable rout­ing used to be a pain in the ass, but our inter­nal tubes make rout­ing easy. Just pop the hous­ing through and it comes out the oth­er end, no need for swear words or a pickset. REPLACEABLE DOWNTUBE PROTECTOR Our remov­able poly­car­bon­ate skid plate pro­tects your down­tube from sharp pointy things.

The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29" trail bike. Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra-efficient dw-link travel means it's equally happy popping off bonus lines as it is crushing all-day epics. LONGER, SLACKER, STEEPER With its well bal­anced mod­ern geom­e­try, the Rip­ley is ready for any adven­ture. The long front end, slack head angle, and short rear end gives you the con­fi­dence to try new lines, while the steep seat tube angle and short­er-off­set fork make it easy to maneu­ver tech­ni­cal climbs and flowy singletrack. DW LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, that has been proven repeat­ed­ly at the high­est lev­els of racing. LONG DROPPER POST We use names like small, medi­um, and large to describe our siz­ing because it's easy to under­stand, but our ultra-low standovers and clear­ance for long drop­pers give you the abil­i­ty to size based on reach. LIGHTWEIGHT PREMIUM CARBON, FOR EVERYONE Whether you order an XTR or NX kit, you'll get the same pre­mi­um car­bon fiber frame. All our bikes are built from the high­est grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance. The Rip­ley weighs 5 lbs with­out the shock. FORK OFFSET Some­times, short­er is bet­ter. Instead of the typ­i­cal 51mm off­set, the new Rip­ley uses a 44mm off­set. This gives you the sta­bil­i­ty of a slack­er head angle while retain­ing the BMX like feel of, well, a Ripley. 2.6" TIRE CLEARANCE We pio­neered the wide rim rev­o­lu­tion a few years ago and inspired a new crop of wider 2.4" – 2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures that pro­duce elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing speed. REMOVABLE ISCG05 MOUNT There if you want it, remov­able if you don't. INTERNAL CABLE TUNNELS Inter­nal cable rout­ing used to be a pain in the ass, but our inter­nal tubes make rout­ing easy. Just pop the hous­ing through and it comes out the oth­er end, no need for swear words or a pickset. REPLACEABLE DOWNTUBE PROTECTOR Our remov­able poly­car­bon­ate skid plate pro­tects your down­tube from sharp pointy things.

Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It's everything we love from the carbon Ripmo, plus a few tweaks. IT'S METAL Over our long tenure from moun­tain biking's awk­ward ado­les­cence to its cur­rent any­thing-shred­dy era, we've exper­i­ment­ed with steel, aluminum, and tita­ni­um-remem­ber the Bow-Ti, the first super­bike? We remem­ber the met­al times, too, and it feels good to offer a pre­mi­um ride expe­ri­ence to our broad­en­ing fam­i­ly of rid­ers, cour­tesy of durable, afford­able alu­minum alloy. MODERN GEOMETRY With a steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, the Rip­mo AF places rid­ers cen­tral­ly and upright over the bot­tom brack­et. It makes for an effi­cient posi­tion that can go the long haul with­out plac­ing too much weight on its slack, 64.9-degree head­tube angle. A 44mm reduced-off­set fork is more sure­foot­ed on steep descents and stead­ies high speeds. Bet­ter up, bet­ter down. DW LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing. COIL COMPATIBLE The Rip­mo AF is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. It allows for coil's lin­ear­i­ty to thrive and we spec air shocks with tunes that pro­vide pop with­out feel­ing too harsh. On the trail, it gives the sus­pen­sion a sup­ple feel through­out the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DVO Now that we made the frames lever­age rate pro­gres­sive enough for a coil we had to find a coil shock that could han­dle the increased stress of being dri­ven off of a cle­vis. The DVO JadeX is up to the chal­lenge so the Rip­mo AF comes with cus­tom-tuned DVO suspension. 2.6" TIRE CLEARANCE Ibis helped pio­neer the wide rim rev­o­lu­tion, which inspired the new crop of wider 2.4" – 2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures, which results in elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing straight-line speed. PICK YOUR SIZE We use words like small, medi­um, and large to describe our siz­ing, because it's easy to under­stand, but our ultra-low standovers give you the abil­i­ty to size your frame based on reach and preference. LONG DROPPER POST What's bet­ter than a drop­per post? A longer one. Our frames are designed to accom­mo­date the longest drop­per posts pos­si­ble. Rid­ers over 5'8" (or 173cm) can eas­i­ly run a 185mm drop­per post, while folks between 5' and 5'8" (152cm – 172cm) can use a post 125mm or longer, depend­ing on inseam length. REMOVABLE ISCG05 MOUNT Our option­al ISCG 05 mount is there if you want it, remov­able if you don't.

Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It's everything we love from the carbon Ripmo, plus a few tweaks. IT'S METAL Over our long tenure from moun­tain biking's awk­ward ado­les­cence to its cur­rent any­thing-shred­dy era, we've exper­i­ment­ed with steel, aluminum, and tita­ni­um-remem­ber the Bow-Ti, the first super­bike? We remem­ber the met­al times, too, and it feels good to offer a pre­mi­um ride expe­ri­ence to our broad­en­ing fam­i­ly of rid­ers, cour­tesy of durable, afford­able alu­minum alloy. MODERN GEOMETRY With a steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, the Rip­mo AF places rid­ers cen­tral­ly and upright over the bot­tom brack­et. It makes for an effi­cient posi­tion that can go the long haul with­out plac­ing too much weight on its slack, 64.9-degree head­tube angle. A 44mm reduced-off­set fork is more sure­foot­ed on steep descents and stead­ies high speeds. Bet­ter up, bet­ter down. DW LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing. COIL COMPATIBLE The Rip­mo AF is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. It allows for coil's lin­ear­i­ty to thrive and we spec air shocks with tunes that pro­vide pop with­out feel­ing too harsh. On the trail, it gives the sus­pen­sion a sup­ple feel through­out the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DVO Now that we made the frames lever­age rate pro­gres­sive enough for a coil we had to find a coil shock that could han­dle the increased stress of being dri­ven off of a cle­vis. The DVO JadeX is up to the chal­lenge so the Rip­mo AF comes with cus­tom-tuned DVO suspension. 2.6" TIRE CLEARANCE Ibis helped pio­neer the wide rim rev­o­lu­tion, which inspired the new crop of wider 2.4" – 2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures, which results in elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing straight-line speed. PICK YOUR SIZE We use words like small, medi­um, and large to describe our siz­ing, because it's easy to under­stand, but our ultra-low standovers give you the abil­i­ty to size your frame based on reach and preference. LONG DROPPER POST What's bet­ter than a drop­per post? A longer one. Our frames are designed to accom­mo­date the longest drop­per posts pos­si­ble. Rid­ers over 5'8" (or 173cm) can eas­i­ly run a 185mm drop­per post, while folks between 5' and 5'8" (152cm – 172cm) can use a post 125mm or longer, depend­ing on inseam length. REMOVABLE ISCG05 MOUNT Our option­al ISCG 05 mount is there if you want it, remov­able if you don't.

Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It's everything we love from the carbon Ripmo, plus a few tweaks. IT'S METAL Over our long tenure from moun­tain biking's awk­ward ado­les­cence to its cur­rent any­thing-shred­dy era, we've exper­i­ment­ed with steel, aluminum, and tita­ni­um-remem­ber the Bow-Ti, the first super­bike? We remem­ber the met­al times, too, and it feels good to offer a pre­mi­um ride expe­ri­ence to our broad­en­ing fam­i­ly of rid­ers, cour­tesy of durable, afford­able alu­minum alloy. MODERN GEOMETRY With a steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, the Rip­mo AF places rid­ers cen­tral­ly and upright over the bot­tom brack­et. It makes for an effi­cient posi­tion that can go the long haul with­out plac­ing too much weight on its slack, 64.9-degree head­tube angle. A 44mm reduced-off­set fork is more sure­foot­ed on steep descents and stead­ies high speeds. Bet­ter up, bet­ter down. DW LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing. COIL COMPATIBLE The Rip­mo AF is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. It allows for coil's lin­ear­i­ty to thrive and we spec air shocks with tunes that pro­vide pop with­out feel­ing too harsh. On the trail, it gives the sus­pen­sion a sup­ple feel through­out the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DVO Now that we made the frames lever­age rate pro­gres­sive enough for a coil we had to find a coil shock that could han­dle the increased stress of being dri­ven off of a cle­vis. The DVO JadeX is up to the chal­lenge so the Rip­mo AF comes with cus­tom-tuned DVO suspension. 2.6" TIRE CLEARANCE Ibis helped pio­neer the wide rim rev­o­lu­tion, which inspired the new crop of wider 2.4" – 2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures, which results in elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing straight-line speed. PICK YOUR SIZE We use words like small, medi­um, and large to describe our siz­ing, because it's easy to under­stand, but our ultra-low standovers give you the abil­i­ty to size your frame based on reach and preference. LONG DROPPER POST What's bet­ter than a drop­per post? A longer one. Our frames are designed to accom­mo­date the longest drop­per posts pos­si­ble. Rid­ers over 5'8" (or 173cm) can eas­i­ly run a 185mm drop­per post, while folks between 5' and 5'8" (152cm – 172cm) can use a post 125mm or longer, depend­ing on inseam length. REMOVABLE ISCG05 MOUNT Our option­al ISCG 05 mount is there if you want it, remov­able if you don't.

What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And, that's exactly what we did for the Ripmo V2. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn't wan­der while climb­ing, and doesn't hold you back descend­ing. It works—all day up, all day down, all day in between. TRACTION TUNE Our cus­tom-tuned front and rear sus­pen­sion fea­ture extra-light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through ter­rain like a tro­phy truck storm­ing through a set of whoops. COIL COMPATIBLE The Rip­mo V2 is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. On the trail, it gives the sus­pen­sion a sup­ple feel throughout the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DROPPER POST CLEARANCE Mo' drop­per, mo' bet­ter. On small frames, you can run 125 – 150mm, depend­ing on your pref­er­ence and inseam length. On Medi­um, Large, and X-Large, a 160mm—or, why not run a 185mm? Our short­er seat-tube lengths and low standovers allow you to choose your size based on your reach preference. TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance-free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est-grade mate­ri­als and opti­mized for the best strength, weight, stiffness, and ride per­for­mance-no mat­ter how much you spend. The Rip­mo weighs a svelte 6.25 lbs with a DPX2 shock, and com­plete builds start at 28 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT So, you're too fast for nar­row-wide chain reten­tion on its own? Chal­lenge accept­ed. Our remov­able ISCG tabs allow shred­ders to bolt on a chain guide, while the rest of us can shave grams. PROTECT YOUR INVESTMENT A poly­car­bon­ate down­tube pro­tec­tor deflects debris, while mold­ed rub­ber swing arm pro­tec­tors keep things qui­et and clean. And, our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.

What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And, that's exactly what we did for the Ripmo V2. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn't wan­der while climb­ing, and doesn't hold you back descend­ing. It works—all day up, all day down, all day in between. TRACTION TUNE Our cus­tom-tuned front and rear sus­pen­sion fea­ture extra-light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through ter­rain like a tro­phy truck storm­ing through a set of whoops. COIL COMPATIBLE The Rip­mo V2 is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. On the trail, it gives the sus­pen­sion a sup­ple feel throughout the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DROPPER POST CLEARANCE Mo' drop­per, mo' bet­ter. On small frames, you can run 125 – 150mm, depend­ing on your pref­er­ence and inseam length. On Medi­um, Large, and X-Large, a 160mm—or, why not run a 185mm? Our short­er seat-tube lengths and low standovers allow you to choose your size based on your reach preference. TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance-free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est-grade mate­ri­als and opti­mized for the best strength, weight, stiffness, and ride per­for­mance-no mat­ter how much you spend. The Rip­mo weighs a svelte 6.25 lbs with a DPX2 shock, and com­plete builds start at 28 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT So, you're too fast for nar­row-wide chain reten­tion on its own? Chal­lenge accept­ed. Our remov­able ISCG tabs allow shred­ders to bolt on a chain guide, while the rest of us can shave grams. PROTECT YOUR INVESTMENT A poly­car­bon­ate down­tube pro­tec­tor deflects debris, while mold­ed rub­ber swing arm pro­tec­tors keep things qui­et and clean. And, our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.

What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And, that's exactly what we did for the Ripmo V2. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn't wan­der while climb­ing, and doesn't hold you back descend­ing. It works—all day up, all day down, all day in between. TRACTION TUNE Our cus­tom-tuned front and rear sus­pen­sion fea­ture extra-light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through ter­rain like a tro­phy truck storm­ing through a set of whoops. COIL COMPATIBLE The Rip­mo V2 is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. On the trail, it gives the sus­pen­sion a sup­ple feel throughout the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DROPPER POST CLEARANCE Mo' drop­per, mo' bet­ter. On small frames, you can run 125 – 150mm, depend­ing on your pref­er­ence and inseam length. On Medi­um, Large, and X-Large, a 160mm—or, why not run a 185mm? Our short­er seat-tube lengths and low standovers allow you to choose your size based on your reach preference. TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance-free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est-grade mate­ri­als and opti­mized for the best strength, weight, stiffness, and ride per­for­mance-no mat­ter how much you spend. The Rip­mo weighs a svelte 6.25 lbs with a DPX2 shock, and com­plete builds start at 28 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT So, you're too fast for nar­row-wide chain reten­tion on its own? Chal­lenge accept­ed. Our remov­able ISCG tabs allow shred­ders to bolt on a chain guide, while the rest of us can shave grams. PROTECT YOUR INVESTMENT A poly­car­bon­ate down­tube pro­tec­tor deflects debris, while mold­ed rub­ber swing arm pro­tec­tors keep things qui­et and clean. And, our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.

What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And, that's exactly what we did for the Ripmo V2. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn't wan­der while climb­ing, and doesn't hold you back descend­ing. It works-all day up, all day down, all day in between. TRACTION TUNE Our cus­tom-tuned front and rear sus­pen­sion fea­ture extra-light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through ter­rain like a tro­phy truck storm­ing through a set of whoops. COIL COMPATIBLE The Rip­mo V2 is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. On the trail, it gives the sus­pen­sion a sup­ple feel throughout the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DROPPER POST CLEARANCE Mo' drop­per, mo' bet­ter. On small frames, you can run 125 – 150mm, depend­ing on your pref­er­ence and inseam length. On Medi­um, Large, and X-Large, a 160mm—or, why not run a 185mm? Our short­er seat-tube lengths and low standovers allow you to choose your size based on your reach preference. TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance-free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est-grade mate­ri­als and opti­mized for the best strength, weight, stiffness, and ride per­for­mance-no mat­ter how much you spend. The Rip­mo weighs a svelte 6.25 lbs with a DPX2 shock, and com­plete builds start at 28 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT So, you're too fast for nar­row-wide chain reten­tion on its own? Chal­lenge accept­ed. Our remov­able ISCG tabs allow shred­ders to bolt on a chain guide, while the rest of us can shave grams. PROTECT YOUR INVESTMENT A poly­car­bon­ate down­tube pro­tec­tor deflects debris, while mold­ed rub­ber swing arm pro­tec­tors keep things qui­et and clean. And, our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.

What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And, that's exactly what we did for the Ripmo V2. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn't wan­der while climb­ing, and doesn't hold you back descend­ing. It works—all day up, all day down, all day in between. TRACTION TUNE Our cus­tom-tuned front and rear sus­pen­sion fea­ture extra-light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through ter­rain like a tro­phy truck storm­ing through a set of whoops. COIL COMPATIBLE The Rip­mo V2 is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. On the trail, it gives the sus­pen­sion a sup­ple feel throughout the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DROPPER POST CLEARANCE Mo' drop­per, mo' bet­ter. On small frames, you can run 125 – 150mm, depend­ing on your pref­er­ence and inseam length. On Medi­um, Large, and X-Large, a 160mm—or, why not run a 185mm? Our short­er seat-tube lengths and low standovers allow you to choose your size based on your reach preference. TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance-free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est-grade mate­ri­als and opti­mized for the best strength, weight, stiffness, and ride per­for­mance-no mat­ter how much you spend. The Rip­mo weighs a svelte 6.25 lbs with a DPX2 shock, and com­plete builds start at 28 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT So, you're too fast for nar­row-wide chain reten­tion on its own? Chal­lenge accept­ed. Our remov­able ISCG tabs allow shred­ders to bolt on a chain guide, while the rest of us can shave grams. PROTECT YOUR INVESTMENT A poly­car­bon­ate down­tube pro­tec­tor deflects debris, while mold­ed rub­ber swing arm pro­tec­tors keep things qui­et and clean. And, our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.

What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And, that's exactly what we did for the Ripmo V2. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn't wan­der while climb­ing, and doesn't hold you back descend­ing. It works—all day up, all day down, all day in between. TRACTION TUNE Our cus­tom-tuned front and rear sus­pen­sion fea­ture extra-light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through ter­rain like a tro­phy truck storm­ing through a set of whoops. COIL COMPATIBLE The Rip­mo V2 is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. On the trail, it gives the sus­pen­sion a sup­ple feel throughout the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DROPPER POST CLEARANCE Mo' drop­per, mo' bet­ter. On small frames, you can run 125 – 150mm, depend­ing on your pref­er­ence and inseam length. On Medi­um, Large, and X-Large, a 160mm—or, why not run a 185mm? Our short­er seat-tube lengths and low standovers allow you to choose your size based on your reach preference. TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance-free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est-grade mate­ri­als and opti­mized for the best strength, weight, stiffness, and ride per­for­mance-no mat­ter how much you spend. The Rip­mo weighs a svelte 6.25 lbs with a DPX2 shock, and com­plete builds start at 28 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT So, you're too fast for nar­row-wide chain reten­tion on its own? Chal­lenge accept­ed. Our remov­able ISCG tabs allow shred­ders to bolt on a chain guide, while the rest of us can shave grams. PROTECT YOUR INVESTMENT A poly­car­bon­ate down­tube pro­tec­tor deflects debris, while mold­ed rub­ber swing arm pro­tec­tors keep things qui­et and clean. And, our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.

LEARNING TO BALANCE AND RIDE A BIKE HAS NEVER BEEN EASIER. PRE HELPS YOUNG RIDERS GET ROLLING AND ENJOY THEIR JOURNEY TOWARD TWO-WHEELED ADVENTURES. KEY PERFORMANCE FACTORS Lightweight - High-quality ALUXX aluminum frame and thermo-formed polymer fork delivers exceptional frame performance with the lightest weight in its category. Easy to ride - Sleek design and stable 12-inch wheels make it easy for young riders to develop balance and riding skills. Kid-friendly features - Lightweight components for enhanced control and safe, ergonomic positioning and fit. TECHS & FEATURES: ALUXX ALUMINUM TECHNOLOGY This Performance level frame material features 6061 alloy with single-butted tubes to produce strong, lightweight framesets for a variety of different bikes and riding styles.

Norco’s Run Bikes are the perfect way for little ones to learn the basics and develop a love of riding. Featuring 12-inch air tires and a lightweight aluminum frame with lower standover to fit smaller riders, kids can start riding early and often. As your little ripper discovers their need for speed, they can get used to controlling it with the easy-to-use rear v-brake and small lever with reach adjust. LIGHTWEIGHT FRAME AND COMPONENTS Our run bikes come complete with and aluminum frame, size scaled tubing and a rear hand brake on our 12-inch models to help little ones learn to stop when the time is right. QUALITY FEATURES AND TOUCH POINTS The premium components list is large on these little run bikes including stainless steel spokes, a quality lightweight saddle and soft krayton rubber grips. EASY TO USE BRAKES Wee ones riding the 10-inch Ninja and Mermaids will get used to controlling their riding with their feet or move up to hand brakes on the 12-inch run bikes with the easy-to-use rear v-brake with a small brake lever with reach adjust. GEOMETRY AND FIT Designed with a low standover height and new drop outs for our littles to easily climb on and off and build skills and confidence. ALUMINUM QR SEATPOST CLAMP As your little one grows - the quick release seat post clamp will come in handy as it allows for easy adjustment of seat height for kids that want to get up and go!

Balance is best learned early, and Cannondale's Trail Balance bikes are the perfect vehicle for kids to learn how to ride a bike. They're built with durable and lightweight aluminum, strong alloy wheels with multi-use tread, and feature an iconic Lefty fork for a touch of cool-factor.

Norco's 16" Coaster mountain bikes are perfect for getting your 4 to 5-year-old youngster riding trails and having fun. These bikes feature Norco's rugged but lightweight aluminum frame, 16-inch wheels, and quality components across the board. With a familiar coaster brake and rear hand brake on the Coaster, young riders can confidently get rolling and dependably stop. They'll love the eye-catching colors and comfortable seat as they experience two-wheeled fun and freedom. - Lightweight alloy frame - Kid-sized components - Coaster brake with rear hand brake - MTB tread tires - Training wheels included

Norco's 20-inch Roller all-purpose mountain bikes are perfect for getting your 5- to 8-year-old youngster riding trails and having fun. These bikes feature Norco's rugged but lightweight aluminum frame, 20-inch wheels, and quality components across the board. With front and rear hand brakes, young riders can confidently get rolling and dependably stop. They'll love the eye-catching colors and comfortable seat as they experience two-wheeled fun and freedom. GEOMETRY AND FIT Low top tube standover heights and shorter chainstay lengths give us the ability to fit smaller children on bikes with larger wheels, while short stems and wide bars add stability, making it easier than ever for young riders to build skills and confidence. EASY TO USE BRAKES AND SHIFTERS We’ve added small levers and reach adjust to fit small hands so youngsters can learn how to use hand brakes quickly. Brakes are easy to use inspiring confidence so they can get used to using hand brakes at a younger age. QUALITY FEATURES AND TOUCH POINTS The premium components list is large on these bikes including stainless steel spokes, a quality lightweight saddle, soft krayton rubber grips. Jr. BMX pedals were specifically selected for durability, safety, and long lasting performance. LIGHTWEIGHT FRAME AND COMPONENTS Our 20-inch all-purpose mountain bikes come complete with size scaled tubing and are carefully fitted with the lightest components for optimal responsiveness and overall ride experience.

Start 'em off right. With its 12" wheels and low-standover frame, the smooth-riding Trail 12 will have even the littlest riders dreaming of singletrack stardom Where it thrives: In town, Leisurely rides What it's built for: Comfort, Handling Highlights: - Light, durable SmartForm C3 Alloy frame with tool-less training wheels - Easy-to-use kickback-style coaster brake - 12" alloy rims with grippy, smooth-rolling tires

The Storm 14 SS provides simple upkeep and operation that'll help young riders find the best line and stop on a dime. Get good on a fully rigid rig with Storm. The Storm 14 SS's lightweight, durable aluminum frame and fork combine with a simple, lightweight drivetrain, quality linear pull brakes and optimized fit for riders from 3'9" to 4'3", building and a love for dirt that’ll last a lifetime. REASONS IT'S RAD - Beautifully crafted for light weight and durability. - Easy gearing for quicker starts and easy climbs. - Quality brakes with short reach levers. - Models to meet the needs of every young rider.

Precaliber 12 is the perfect first bike for little riders who are ahead of the curve and ready for two wheels at a younger age than most. It has a handle built into the saddle so you can guide them as they ride, and tool-free training wheels that are super easy to install and remove. It's a great fit for kids ages 3-4, between 36-40" tall. It's right for you if... Your kid may be young and small, but they're ready to ride! You want to make their first real bike experience a great one with a bike that's comfortable, durable, and fun. The tech you get This toddler-friendly bike has a handle integrated right into the saddle so you can help guide your child while they ride, plus a coaster brake and tool-less training wheels that can be installed and removed at the turn of a dial. Plus, the lightweight aluminum frame is easy for your little one to maneuver. The final word You want to make sure your child's first bike is comfortable, durable, and fun. Each of our bikes, all the way down to the smallest size, is built to our highest standards, so you can feel confident when you choose Trek for your family. Why you'll love it - This bike is a memory-maker: seeing your child ride their bike for the first time is something you'll never forget - This bike is hand-me-down heaven: it's built to last, so younger siblings can inherit this bike and it'll still feel like new - Investing in a kids' bike from an established bike brand is worth it—Trek kids' bikes are designed and assembled by people who know bikes - Like all Precaliber bikes, the frame is lower so it's easier for kids to stand over and hop on and off

Just add sunshine and watch them grow. Electra's Sprocket 16" bikes are perfect for first time riders. Featuring Electra's signature style and quality as well as our patented Flat Foot Technology, kids will be riding until the street lights come on. Easy-to-remove training make this the perfect ride for kids ages 3 to 5 between 3' to 3' 10" tall. It's right for you if... You're looking for a well designed, quality bike for your little one that is built to last. These fun-sized bikes embody all of the energy, creativity, and explorative nature of being a kid. After all, the best memories are made on two wheels. The tech you get Comfort is key with Electra's Flat Foot Technology, Kraton grips, custom Selle Royal saddle, and front linear-pull brake with adjustable reach lever. Parents will love easy-to-remove training wheels, tires with Kevlar Guard casing to protect against flats and a rear coaster brake for a smooth stop. The final word There's almost no better feeling than watching your child ride their bike for the first time. And when you finally take the training wheels off? Forget about it. With Electra's legendary quality, style, comfort and control, the Sprocket will make your kid as happy as you are. Why you'll love it - Flat Foot Technology allows kids to sit upright and plant their feet flat on the ground without ever leaving the saddle, which means no tippy-toe stops and a wide view of the road so they can see what's coming. - Front alloy linear-pull brakes and a rear coaster brake with adjustable brake levers allow them to stop on a dime when they hear the ice cream truck. - Easy-to-remove training wheels that require no tools. - 16” tires with Kevlar Guard casing to protect against flats and keep them riding all day. - Designed as a universal, aluminum frame and built to last so this bike can be passed down to siblings. - Accessorize their new ride with a custom Electra bell or handlebar bag to carry all the necessities.

Teaching and learning to ride is a breeze with Precaliber 16 Coaster Brake. It has a handle built into the saddle so you can guide while they ride, and tool-free training wheels that are super easy to install and remove. It's a great fit for kids ages 4-5 between 39-46? tall. It's right for you if... It's finally time to teach your little one to ride! You want to make it a great memory, so you're looking for a bike that's comfortable, durable, and fun. Simplicity is key, and you want to be able to pop off the training wheels easily when the time is right. The tech you get This kid-friendly bike has a handle integrated right into the saddle so you can help guide your child while they ride, plus a coaster brake and tool-less training wheels that can be installed and removed at the turn of a dial. Plus, the lightweight aluminum frame is easy to maneuver. The final word You want to make sure your child's first bike is comfortable, durable, and fun. Each of our bikes, all the way down to the smallest size, is built to our highest standards, so you can feel confident when you choose Trek for your family. Why you'll love it - This bike is a memory-maker: seeing your child ride their bike for the first time is something you'll never forget - This bike is hand-me-down heaven: it's built to last, so younger siblings can inherit this bike and it'll still feel like new - Investing in a kids' bike from an established bike brand is worth it-Trek kids' bikes are designed and assembled by people who know bikes - You can replace the saddle's integrated handle with an integrated light mount when your child starts adventuring on their own - Like all Precaliber bikes, the frame is lower so it's easier for kids to stand over and hop on and off Features: Integrated handle Hidden handle under the saddle helps you guide your child while they learn to ride. Toolless training wheels When your little one is ready to ditch the training wheels, the only tools you'll need are your hands.

The Storm 20 SS provides simple upkeep and operation that'll help young riders find the best line and stop on a dime. Get good on a fully rigid rig with Storm. The Storm 20 SS's lightweight, durable aluminum frame and fork combine with a simple, lightweight drivetrain, quality linear pull brakes and optimized fit for riders from 3'9" to 4'3", building and a love for dirt that'll last a lifetime. REASONS IT'S RAD - Beautifully crafted for light weight and durability. - Easy gearing for quicker starts and easy climbs. - Quality brakes with short reach levers. - Models to meet the needs of every young rider.

Norco's 14" Coaster mountain bikes are perfect for getting your 3 to 4-year-old youngster riding trails and having fun. These bikes feature Norco's rugged but lightweight aluminum frame, 14-inch wheels, and quality components across the board. With a familiar coaster brake and rear hand brake on the Coaster, young riders can confidently get rolling and dependably stop. They'll love the eye-catching colors and comfortable seat as they experience two-wheeled fun and freedom. - Lightweight alloy frame - Kid-sized components - Coaster brake with rear hand brake - MTB tread tires - Training wheels included